Friday, March 29, 2024

9 major e-cigarette testing equipment

Share

In addition to the detection of nicotine in vape juice, the quality of atomizers and batteries in vape is also one of the issues we should pay attention to. Atomizer quality testing items mainly include resistance value, air flow, smoke volume, oil leakage and working temperature detection. Battery quality detection is more cumbersome, including short circuit protection, charging protection, overcurrent, charging time, smoking overtime protection and other detection items.

The vape testing machine is used to test the life of vape atomizer, vape battery, vape rod, middlehead, battery, cartridge or finished product, and the life of vape in one-way and two-way rotation direction. The following categories of vape testing machines are listed in the article. If you have more relevant information, please contact Vape hk for addition.

1. Vape Gas Leakage Detection Instrument

Vape exhaust and leakage detection equipment is one of the series of vape testing machines. It is mainly used to test the life of vape atomizers, vape batteries (which can be measured by air suction or button connection) or finished vape.

2. Vape life testing machine (heat not burn)

1. Inhalation mode is 8 piston cylinders.
2. Smoking volume is 1-300 ml (smoke volume of different specifications can be set, glass tubes need to be calibrated to show the current smoke volume);
3. The flue gas velocity is 17.5 ml/sec (industry standard is 17.5 ml/sec); at the same time, the equipment needs to increase the flue gas velocity set by itself.
4. The duration is 1-9.9 Seconds.
5. The interval time of each mouth is 1-999 Seconds.
6. The number of smokers can be set from 1 to 9999 times.
7. Power stepping motor (type 60, 6N/M) +PLC control;
8. Key test function, independent control of vape switch button, key action programmable (press time, key interval), logic in line with heating non-combustion smoke (IQOS class), need to be designed to fix various types of electronic smoke fixture, to meet the test requirements;
9. The control mode is controlled by computer, which can operate the computer independently, and 8 stations can be controlled independently and simultaneously.
10. Smoking resistance test can be carried out.
11. It can monitor the voltage, current, power and current power of vape in real time and form test curves.
12. The computer can automatically record smoking resistance, number of mouths, voltage, power and power consumption data of each mouthful, save them to EXCLE and generate reports.
13. The upper and lower values of device resistance, voltage, current, power and flow rate can be determined by PASS or FAIL.
14. Peak current on-line meets 20A specification.

Vape life testing machine

3. Vape inhalation resistance tester

The suction resistance test of electronic cigarette is mainly used to measure the smoking resistance of electronic cigarette. It is suitable for the quality control of electronic cigarette production and the inspection of electronic cigarette. When the smoking action simulated on the electronic cigarette inhales the air with a fixed flow rate of 17.5 ml/s, a certain vacuum pressure will be generated at the intake end of the electronic cigarette. This pressure is the resistance of inhalation, referred to as the resistance of inhalation. By measuring this pressure, the resistance of inhalation can be measured.

Vape inhalation resistance tester

4. Vape gas tightness tester

The electronic flue gas tightness tester is mainly used to test the gas tightness device of vape components.

Electronic flue gas tightness tester

5. Controllable Blower for Vape

The vape special controllable air blower is used to test the air flow induction device of the vape battery stick. That is to say, after the orbital head and related electronic components are welded, the blowing test is done with this machine. If the orbital head is welded correctly, the corresponding indicator lights will be on at the same time. Each time the switch is pressed, the jet of the nozzle is automatically closed after a certain time delay.

6. Electronic cigarette inhalation time counting machine

Vape counting machine is one of the series of vape testing machines, which is mainly used to test the battery life of vape. The principle is to adjust a certain amount of inspiration or suction pressure, suction nozzle on the sample one stop, so that repeated cycle until the electronic cigarette or electronic cigarette battery exhausted or dropped to a certain voltage, the number of times obtained, in order to determine the service life of electronic cigarette or electronic cigarette battery, and to improve it.

Electronic cigarette counting machine

7. Vape inhaling resistance tester

Vape inhaling resistance test is mainly used to measure the vaping resistance of electronic cigarette. It is suitable for the quality control of electronic cigarette production and the inspection of electronic cigarette. When the smoking action simulated on the electronic cigarette inhales the fixed flow of air, a certain vacuum pressure will be generated at the intake end of the electronic cigarette. This pressure is the resistance of inhalation, referred to as the resistance of inhalation. By measuring this pressure, the resistance of inhalation can be measured.

Vape inhaling resistance tester

8. Rotary Shaft Testing Machine for Electronic Cigarette Box Cover

The electronic cigarette box cover rotating shaft tester mainly detects the number or time of repeated opening/closing to complete breaking, and checks whether the rotating shaft has been damaged after a certain time or a certain number of times. The electronic cigarette box cover turnover fatigue tester can simulate the electronic cigarette box cover to open and close repeatedly at a certain speed and angle, such as RELX, jouz and other electronic cigarette related products.

Number or time of repeated opening/closing to complete disconnection.
After a certain number of times or a certain time, check whether the rotating shaft has been damaged.

Rotary Shaft Testing Machine for Electronic Cigarette Box Cover

9. Vape high altitude low pressure tester

This kind of test is mainly used in battery testing. The ultimate purpose of the test is to see that the battery does not explode or ignite, smoke or leak, and the battery protection valve cannot be destroyed.

It includes vape cryogenic testing machine, vape sensitivity testing machine, vape PCBA testing machine and so on.

1 COMMENT

Subscribe
Notify of
guest

1 Comment
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
henry kibet rotich
henry kibet rotich
11 months ago

what equipment for cigarette testing do you have?
do you have the 10-20 cigarette testing equipment

Read more

Latest News