The domestic player group COOLVAPOR recently launched an RDA product with the bottom e-liquid injecting method as the starting point. The RDA in the market is usually just compatible with the bottom oil injection (delivered with hollow electrode screws), and it is rare to see such a tough positioning. Abandon the traditional top drop game? The MGTK RDA will be dismantled one by one as detailed as possible below.
Very simple black cardboard packaging, compared to COOLVAPOR in the previous product packaging, this MGTK RDA is a bit low-profile, from the COOLVAPOR logo on the package can also see the team made a visual change.
At present, there are few data related to MGTK RDA found in the network search engine. The two experience samples sent by COOLVAPOR are black purple and black and blue paint surface appearance. The factory delivery materials include hex screwdriver, spare seal ring and spare. Screws and a pair of Kleopton finished coils in NI90 material.
MGTK is a cut-off, heavy smoke RDA, 810 large-caliber suction nozzle and large side air intake design. With this set of RDA, we can find a lot of similar products. I am afraid there is no need to emphasize this structure. characteristic. The bottom filling position determines that the preset electrode screw is hollow, but if you like to use this RDA on a non-bottom injection device, a toothpick can be perfectly solved.
The classic side-intake RDA structure, the designer cleverly put a force slot between the base and the cover, so that this RDA will not lock up, all kinds of daily experience in the care are taken care of In the structure of the product, this is also the charm of the senior player group products.
The top cover part adopts the non-slip knurling to enhance the frictional force when the hand is adjusted, and the damping feeling of the adjustment is good when the sealing ring of the oil surface is matched. According to the size of this group of intake holes, it can be roughly estimated that the MGTK RDA’s heat dissipation capacity on the coil data, such as the original pair of high-calorie NI90 Clapton, has no compatible bottleneck.
The top cover does not have the so-called good taste dome design in the deification theory. The dome in the atomizer is mostly a condensing reflux service, which has little to do with the actual smoke. The large-diameter nozzle will have a small amount of condensation hanging on the inner wall during use, and the paper towel can be cleaned regularly, and it is impossible to completely avoid the condensate as long as it is an electronic cigarette atomizer.
The base is the essence of the structure of MGTK RDA. The designer cleverly raises the electrode base and frees the bottom out of an oversized oil storage space. The smoke oil entering the tank through the bottom extrusion will also follow the high Low physical properties flow naturally, resulting in an extra oil storage space for single use.
The full filling of cotton not only guarantees the high quality of the bottom filling. If it is required to use the traditional top drop method, a toothpick type object is used to block the electrode oil hole, and the top drop of the smoke oil will first come in contact with it. The cotton near the coil is transported at a very high speed, and the excess smoke oil will flow to the bottom space.
In addition to the raw taste data of the original NI90 Clapton, the MGTK RDA is also compatible with the common data of mechanical rods such as A1/22G/3.0/5 laps. If you need to get a more unrestrained experience of smoke, you can convert it into Ultra low resistance conventional A1 coil such as 21G/20G. It is worth mentioning that the lock wire hole is straight, and there is a certain wide capacity in the trimming of the length of the coil leg, and it is easier to grasp the length than the sealed lock wire hole.
There is also a certain degree of difficulty for novices to use this type of open electrode stage, but in fact, as long as the coil is locked out of the slightly extended position, the position of the coil is directly affected by the air flow is the key, and there is no need to lengthen the leg to make the coil forcefully As close as possible to the cover position.
Due to the large space at the bottom and the open electrode stage, cotton can be carelessly filled. Take the example of a square silicone oil bottle with a bottom-filled GUN BF MOD as an example, 70% of the full bottle of cigarette oil is absorbed by cotton. Similarly, in the top drop mode, when the cigarette oil is dripped inside the 810 suction nozzle, the cigarette oil directly contacts the four cotton feet before flowing into the bottom.
The MGTK RDA at the bottom of the refueling position is obviously the best bet for big smoke players. Although the official did not deliver the replacement solid electrode screws, the experience of the traditional top drop using the small modification is also excellent. It also shows its Compatibility is not limited to the use of only the bottom filling device.
The heating wire material is more and more, COOLVAPOR for the matching and custom-made NI90 material Clapton Coil has faster heating than the NI80 features. However, whether using the original NI90, the ordinary NI80 or the more common A1 thick-diameter low-resistance coil, MGTK RDA can achieve a balanced state in terms of smoke and taste, with both smoke and taste, and heat dissipation. good.
A statement – “Good appearance is justice,” shows on the Internet. Look back to the past products of COOLVAPOR, each model is not losing the characteristics of the senior player team.
