After more than 10 years of development, we have slowly established a certain understanding of the taste of e-cigarettes. The problem of paste taste / burnt taste / peculiar smell has been paid more and more attention by customers or consumers. Based on the above needs, let me share with you below. The problem of paste taste / burnt taste / peculiar smell is generally caused by the following reasons:
The output voltage of battery rod / microphone is too high. When the oil guide is not smooth, the heating wire and oil absorption cotton quilt are scorched;
The discharge rate of the battery is too high. When the oil guide is not smooth, the heating wire and oil absorption cotton quilt are scorched;
The standing time after oil injection is not enough, and the smoke oil is not fully transmitted to the heating wire and oil absorption cotton. Suction will scorch the heating wire and oil absorption cotton;
The oil and electricity do not match. In the later stage of smoking, the tobacco and oil are consumed first, the battery still has electricity, and the heating wire and oil absorbing cotton quilt are burnt;
The cigarette oil has high viscosity and poor fluidity, which causes the oil guide of the oil absorption cotton not to be smooth, and the suction will scorch the heating wire and the oil absorption cotton quilt;
The density of oil absorbent cotton is large or not fluffy enough, which causes the oil guide of oil absorbent cotton not to be smooth, and the suction will scorch the heating wire and oil absorbent cotton quilt;
The small diameter or quantity of oil inlet holes causes the oil guide of oil absorption cotton not to be smooth, and the suction will scorch the heating wire and oil absorption cotton quilt;
Tobacco oil contains high sugar / sweetener, which causes carbon deposition in oil absorbent cotton and causes suction paste smell;
The design of the oil inlet hole is too high. When the amount of oil in the oil cup is less than 1 / 3, the oil absorption cotton can not absorb the smoke oil, and the suction will scorch the heating wire and the oil absorption cotton;
The design of the interference between the oil inlet hole and the oil absorption cotton is unreasonable, which causes the oil guide of the oil absorption cotton not to be smooth, and the suction will scorch the heating wire and the oil absorption cotton quilt;
Improper storage of tobacco oil or beyond the shelf life, resulting in taste variation;
Due to various reasons, two or more kinds of tobacco oil are accidentally mixed, resulting in taste variation;
There is no waking oil before oil injection, which causes stratification of smoke and oil, resulting in great difference in taste;
Glue is used in the structural design of atomizer, and the heating device evaporates the glue, resulting in peculiar smell of glue;
There are oil stains such as demoulding machine on the surface of insulating ring / silica gel sleeve / sealing ring, which cause taste variation in contact with tobacco oil;
Iron chromium aluminum heating wire has a chemical reaction with tobacco oil, causing rust smell in the suction;
The plastic / silica gel / glass fiber tube is too close to the heating wire, and the heating wire will scorch when working, resulting in peculiar smell;
The structural design is defective, and the condensate flows back into the oil absorption cotton, causing suction odor;
The air passage is not smooth, and the condensate accumulates in a small amount around the heating wire. When pumping, the oil is fried, resulting in hot mouth and peculiar smell;
The density of oil storage cotton is high, which locks some components in the tobacco oil, and fails to fully release and give full play to the original formula of tobacco oil, resulting in peculiar smell;
Improper process arrangement or operation, PCBA or microphone is activated before oil injection, and the heating wire and oil absorption cotton will be scorched;
Source link
