Wanna buy the YOOZ ZERO 2 Closed pre-filled pod device free shipping, please visit https://www.buyecigkits.com/e-cig-accessories/e-cig-batteries/original-yooz-zero-2-vape-pre-filled-pod-device-battery-350mah-free-shipping/
In terms of the pod cartridge slot, YOOZ ZERO 2 Closed pre-filled pod device has optimized three structures, which greatly extend the service life of the battery device:
One is to expand the pod cartridge slot. The pod cartridge slot of the 1st generation is relatively small and inconvenient to clean, which leads to a reduction in the service life of the printed circuit board, while the YOOZ ZERO 2 Closed pre-filled pod device changes the sealing silicone structure to expand the pod cartridge slot and extend the lifespan of the printed circuit board;
The second is the anti-leakage structure of the pod cartridge head. According to YOOZ, during the test, the cartridge was still for 24 hours after dripping, and there was no leakage of e-liquid, and there was no leakage after applying 3Kpa negative pressure;
The third is to improve the sealing effect of the silica gel. The slot of the 1st generation device battery comes with a sharp edge, and the sealing ring may be damaged when the battery holder is inserted, which will cause condensate to flow into the mainboard. The second-generation of the YOOZ ZERO 2 Closed pre-filled pod slot is changed to a 45°C angle, which can be guaranteed the integrity of the sealing ring after inserting the battery holder.
The air inlet has been optimized, changing from 1.15mm in the first generation to 0.7mm now. The suction resistance is adjusted to 600Pa-900Pa (flow rate 17.5 ML/S) and the suction experience is better.
The YOOZ ZERO 2 Closed pre-filled pod device uses the more popular Type-C charging port, which solves the problem of inaccurate charging.
The shell of the USB connector is DIP-shaped, and the welding method between it and the PCB board is plug-in welding, which has high firmness and long service life.
The breathing light has been upgraded. The breathing light of the 1st-generation product has only one color, while the second-generation breathing light has three colors. The battery level is less than 30% and displays red; the battery level is 30% to 60% is displayed as green; the battery level is greater than 60% is displayed as white, and the light gradually brightens for 1.6s during use. The light fades out for 2 seconds after stopping use.
In terms of battery life, the ZERO 2 is equipped with a 350mAh battery. Like the 1st generation, it can basically guarantee one day of use when fully charged; the official standard charging time is 40min, and the full charge is in the empty state. The measured time is 38min
